HYSIScientific Equipment
Centrifugal vacuum concentrators, automated solvent evaporation workstations, ultra-low temperature cold traps and vacuum pumps — for sample concentration, drying and preparation in life science, pharma, environmental and materials laboratories.
Click an illustration to show only that type of machine.
Centrifugation
Acid-resistant refrigerated concentrator for aggressive acid digests, down to −10 °C.
Centrifugation
Acid-resistant vacuum centrifugal concentrator for trace metal and inorganic sample preparation.
Centrifugation
Integrated solvent evaporation workstation handling solvents boiling up to 220 °C.
Centrifugation
Automated solvent evaporation workstation with self-cleaning and gradient vacuum.
Centrifugation
High-throughput automated solvent evaporation workstation with inert-gas protection.
Centrifugation
Oil-free diaphragm vacuum pump with a PTFE-lined gas path for corrosive vapours.
Centrifugation
Fully automated centrifugal concentrator designed for integration into lab automation lines.
Centrifugation
Automated concentrator with infrared heating, top-opening lid and plate rotor.
Centrifugation
High-throughput centrifugal concentrator for large batch sample preparation.
Centrifugation
All-in-one centrifugal concentrator with integrated vacuum control and imaging.
Centrifugation
Chamber, cold trap and vacuum control integrated in a single refrigerated chassis.
Centrifugation
Refrigerated centrifugal vacuum concentrator with full-range gradient vacuum control.
Centrifugation
Refrigerated concentrator with the highest centrifugal force in the range (650 ×g).
Centrifugation
Refrigerated centrifugal vacuum concentrator with a −10 °C chamber for heat-sensitive samples.
Centrifugation
Sample concentrator configured for forensic and clinical toxicology extracts.
Centrifugation
Solvent recovery cold trap at −50 °C, protection for the vacuum pump.
Centrifugation
Solvent recovery cold trap at −60 °C for volatile solvents.
Centrifugation
Ultra-low temperature cold trap at −80 °C for the most volatile solvents.
Centrifugation
Vacuum centrifugal concentrator with an extended temperature range and imaging.
Centrifugation
Higher-force, higher-capacity vacuum centrifugal concentrator for demanding separations.
Centrifugation
Vacuum centrifugal concentrator for routine concentration, drying and sample clean-up.
Centrifugation
Benchtop vacuum centrifugal concentrator with a very small footprint.
Centrifugation
Corrosion-resistant benchtop vacuum centrifugal concentrator for routine use.
Centrifugation
Vacuum concentrator configured for DNA / RNA drying and molecular biology workflows.
No products match this filter.
A centrifugal vacuum concentrator spins samples under vacuum with gentle heat so solvent is removed without boiling, protecting heat-sensitive analytes. An automated solvent evaporation workstation performs the same duty at higher throughput through programmable protocols — it is normally chosen where sample counts are high or the process has to be reproducible run after run.
Nucleic acid and protein work calls for low-temperature operation to prevent degradation. A refrigerated concentrator plus a cold trap is the usual choice, so evaporated solvent is captured instead of being drawn into the pump. Sample volume and solvent type decide the chamber size.
Acid-resistant models use chemically inert or PTFE-coated wetted parts. The chamber, seal and tubing materials are matched to your solvent list, so send the chemistry along with the requirement and the wetted-material specification is confirmed before ordering.
Five points: sample volume per batch, number of samples, solvent type and boiling point, whether the analytes are heat-sensitive, and the target vacuum level. With those we can shortlist models and issue a configuration proposal.
Tell us your sample volume, solvent type and target analytes. Our specialists prepare a configuration proposal — you choose the final technical solution.
Request a Configuration Proposal